Lenovo ThinkStation P710 User Manual page 111

10. Slide the storage drive bracket with the converter into the storage drive bay.
Figure 77. Installing the type
11. Connect the signal cable and the power cable to the converter, and then close the handles on both
sides of the storage drive bracket.
To install or replace a 2.5-inch storage drive with a converter in a type
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 61.
2. Locate the storage drive bay in which you want to install or replace a storage drive. See "Internal
drives" on page 10.
3. Press the pit on the bracket cover, and then grasp the tilted cover to pull the bracket out of the storage
drive bay.
Figure 78. Removing the type
1
storage drive bracket
2
storage drive bracket
2 bracket, do the following:
.
Chapter 7 Installing or replacing hardware
99