Hipath 3000 V5.0, Hipath 5000 V5.0 , Service Manual - Siemens HiPath 3000 Service Manual

Working on electrical circuits
Work on low-voltage electrical networks (100 to 240 Vac) must only be carried out by qual-
●
ified personnel or authorized electrical engineers.
Do not work alone. Work with another person who knows the locations of the power-off
●
switches.
Never touch live wires that are not properly insulated.
●
Ensure that a machine cannot be powered on from another source or controlled from a dif-
●
ferent circuit breaker or disconnecting switch.
Before starting any work, check whether the corresponding circuits are still on power. Nev-
●
er take it for granted that all circuits have reliably been disconnected from the power supply
when a fuse or a main switch has been switched off.
Use caution when installing or modifying telephone lines. Never install telephone wiring
●
during an electrical storm.
Expect leakage current from the telecommunications network.
●
When performing work on an open system, ensure that it is never left unsupervised.
●
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
inform.fm
Important Information
Safety Information
1-7