Operate Mode - Canon VC-C3 Instruction Manual

Using the VC-C3

OPERATE Mode

When you turn the VC-C3 ON, the VC-C3 automatically enters the OPERATE mode.
It is recommended to place the VC-C3 in out of the OPERATE mode when
the VC-C3 will not be used for an extended period of time.
24
To go out of the OPERATE mode
When the VC-C3 is in the OPERATE mode,
press the button.
The video and audio are muted and the base LED
blinks green (at 1-second intervals).
The LEDs on the camera head and the camera
control unit remain lit.
All buttons on the wireless controller other than
the button are disabled.
The preset positions are not cleared.
The zoom buttons on the camera head
continue to function even when the VC-
C3 is out of the OPERATE mode.
If you press the zoom buttons while the
VC-C3 is out of the OPERATE mode, the
VC-C3 zooms even though you cannot see
it on the screen. As a result, the zoom
position will differ from the earlier image
when the VC-C3 returns to the OPERATE
mode.
To return to the OPERATE mode
When the VC-C3 is out of the OPERATE
mode, press the
The audio and video are enabled , the base LED
stops blinking and remains lit green, and the other
wireless controller functions are enabled.
button.