Table of Contents
Advertisement
Changing the Flash Mode
The flash can be made to fire every time you take a
picture, or it can be turned off. Choose a mode
suitable for the subject and place you are shooting.
Select the flash mode while the camera is turned on.
Press the v<§> flash mode
button.
• You can check
the mode on the
LCD panel.
Flash mode button
(V) Auto flash without red-eye reduction (
(V) <®> Auto flash with red-eye reduction {
Flash ON
34)
Flash OFF
35)
Slow-synchro with red-eye reduction (—^ 36)
31)
32)
* : When the flash is set to fire automatically, (V) appears on the LCD
panel when the shutter button is pressed halfway.
^ V
'Be careful not lo push the tia^h into the
camera.
The
flash will nol fire and the power to the camera will be
turned off.
ra
• The camera's default setting is (V) . To change to
(V)<§> after the power is turned on, turn the power
off when (H® is displayed. When the power is
turned on again, <H<$> will be displayed. To revert to
the original state, turn the power off when
(V)
is
selected,
13-30
Advertisement
Table of Contents
