Introduction
1.1
Purpose of this documentation
These instructions contain all the information you need for commissioning and using the
transmitter.
It is aimed both at persons mechanically installing the device, connecting it electronically,
configuring the parameters and commissioning it as well as service and maintenance
engineers.
1.2
Change history
Currently released versions of these instructions:
Edition
03/2005
06/2005
1.3
Further information
Information
The contents of these instructions shall not become part of or modify any prior or existing
agreement, commitment or relationship. All commitments on the part of Siemens AG are
contained in the respective sales contract which also contains the complete and solely
applicable warranty conditions. Any statements contained herein do not create new
warranties or modify the existing warranty.
The content reflects the technical status for printing. We reserve the right to make technical
changes in the course of further development.
SITRANS P300 with HART communication
Operating Instructions, 06/2005, A5E00359579-02
Comment
Firmware identifier,
nameplate
First edition
FW: 11.03.06
02
FW: 11.03.06
System integration
PDM V 6.00;
Dev. R.1 DD Rev.1
PDM V 6.00;
Dev. R.1 DD Rev.1
1
Installation path for
PDM
SITRANS P300
SITRANS P300
1-1