4.3
Installation for level version
4.3.1
Information for installing level version
Requirement
The installation location is to be as follows:
• Easily accessible
• As close as possible to the measuring point
• Vibration-free
• Within the permitted ambient temperature values
Installation configuration
The transmitter can only be used in non-pressurized vessels for level.
SITRANS P300 with HART communication
Operating Instructions, 06/2005, A5E00359579-02
Note
Protect the transmitter against:
Direct heat radiation
•
Rapid temperature fluctuations
•
Heavy contamination
•
Mechanical damage
•
Notice
Compare the desired operating data with the data on the nameplate.
Notice
The housing may only be opened for maintenance, local operation or to make electrical
connections.
Installation
4.3 Installation for level version
4-5