Local Operation; Local Control Elements - Siemens SITRANS P300 Operating Instructions Manual

Reference
NAMUR recommendation NE43 of 18.01.94
"Standardization of the signal level for the failure information from digital transmitters with an
analog output signal".
See also
Fault current (Page 7-18)
Setting the current limits (Page 7-19)
6.5

Local operation

6.5.1

Local control elements

Introduction
The transmitter can be operated on site with the keys (buttons). Selectable modes can be
used to choose and execute the functions described in the table. The number of functions is
limited if the device does not have a digital display.
Control elements
Figure 6-5
(1)
(3)
SITRANS P300 with HART communication
Operating Instructions, 06/2005, A5E00359579-02
Position of keys and digital display
Digital display
Test connector
(2) Keys
Operation
6.5 Local operation
6-9