Warning And Safety Instructions - Miele PG8582 CD Operating Instructions Manual

Warning and Safety instructions

14
This machine complies with all statutory safety requirements.
Inappropriate use can, however, lead to personal injury and
material damage.
Read these instructions carefully before using it for the first time to
avoid the risk of accidents and damage to the machine.
Keep these instructions in a safe place where they are accessible
to users at all times.
Correct application

This washer-disinfector is designed for use with the applications
described in these operating instructions only. Alterations or
conversions to the machine, or using it for purposes other than those
for which it was designed, are not permitted and could be dangerous.
This washer-disinfector must only be used for cleaning and
disinfecting instruments or medical devices if the manufacturer has
stated that they are suitable for machine reprocessing.
Manufacturer's cleaning and maintenance instructions must also be
observed.
Miele cannot be held liable for damage caused by improper or
incorrect use or operation of the machine.

This machine is intended for indoor use only.
Risk of injury
Please pay attention to the following notes to avoid injury

This washer-disinfector must be commissioned, serviced and
repaired by a Miele authorised and trained service technician only. To
ensure compliance with the Medical Device Directive, Miele repair
and maintenance contracts are recommended. Unauthorised repairs
can pose considerable risks to the user.

Do not install the machine in an area where there is any risk of
explosion or of freezing conditions.

In order to reduce the risk of water damage, the area around the
machine should be limited to furniture and fittings that are designed
for use in commercial environments.

Some metal parts pose a risk of injury/being cut. Wear cut-
resistant protective gloves when transporting and setting up the
machine.

If the machine is built under, it must only be installed under a
continuous worktop run which is firmly secured to adjacent units to
improve stability.