Table of Contents
Advertisement
Item
Vector Scope
Enable
Target
Position
64
OSD Menu
Setting Options (underline indicates factory default)
Configures various settings for the vector scope. Vector scope displays the intensity of color signals
and hue with the horizontal axis showing the color difference signal Cb and the vertical line showing
Cr.
(Cb, Cr) = (0, 0)
Note
• Vector scope cannot be displayed in the following cases:
-
When an enlarged image is displayed
-
When "Frame Hold" (during interlace signal or PsF signal) or "False Color" is "On"
-
When "Peaking 1" or "Peaking 2" is selected
-
During execution of "Playback File" under "Screen Capture"
-
While "Test Pattern" is displayed
• Only the signal set by "Marker/TC/WFM/VEC Input" is displayed in the "Multi View (Quad)" or
"Multi View (Dual)" display.
• When "Vector Scope" is set to "On", "Wave Form Monitor" turns "Off".
Switches the vector scope On, Off.
On, Off
Sets the target.
75%, 100%
Selects the display position.
Bottom Left, Bottom Right
Note
• This setting becomes invalid in the "Multi View (Dual)" display.
(Cb, Cr) = (255, 255)
Red
Magenta
Yellow
Cr
Green
Cyan
Cb
Blue
Advertisement
Table of Contents
