Table of Contents
Advertisement
CAUTION
• When connecting an external sensor for calibration to the USB port, the USB cable length must not exceed 3 m (9.8 ft.).
Otherwise, communication error may occur and correct calibration may not be possible.
• For safety, do not connect any connector that may have excessive voltage to the terminal of the video display when
connecting peripheral devices.
• Pass through SD-SDI signals are not output correctly.
Note
• Both FAT16 and FAT32 USB memory devices are supported.
• Proper operation cannot be guaranteed for all USB memories.
• It may take 10 seconds or more for the USB memory to be recognized. If the function to save data on a USB memory is
executed during recognition, the message "Detecting USB memory" is displayed.
14
Nomenclature
Advertisement
Table of Contents
