Adjustment - Canon DP-V2420 Instruction Manual

Adjustment

This menu is used to adjust the image quality and perform calibration without a PC.
Item
Picture Mode
Contrast
Brightness
Chroma
Sharpness
Backlight
Control
Setting Options (underline indicates factory default)
Select a preset mode. See
SMPTE-C, EBU, ITU-R BT.709, ITU-R BT.2020, Adobe RGB, DCI-P3: Mode set to the
brightness, color temperature, gamma, and color gamut of the three primary colors chromaticity
points of each standard.
User 1-7: Custom modes. Set each item of "Adjustment". You can change the mode name within
16 one-byte characters including alphabetical characters, numbers, and symbols.
Canon Log: Canon Log is ideal when viewing image captured with CINEMA EOS camera/video
camera. Displays Canon Log video without having to import Viewing LUT.
ACESproxy: A mode to display ACESproxy videos in optimum gamma and color gamut.
Adjusts the white level of the image. (Increments of 1)
0 to 6000
 W hen "Peak Luminance Control" in "Detail Settings" is set to "On", the settable range is shown
below.
When "Peak Luminance Control" is "On", "Contrast [Peak Control]" is displayed.
0 to 12000
Note
• In Multi View (Dual) display, when right screen is selected as the target screen, it is not possible
to adjust the Contrast after selecting Picture Mode. The Contrast value is same on both
screens.
Adjusts the black level of the image. (Increments of 1)
-500 to 500
Adjusts the color saturation of the image (color depth). (Increments of 1)
0 to 2000
Note
• You cannot adjust when "User LUT" in "CDL/User LUT" is selected.
Adjusts the sharpness of the image. (Increments of 1)
0 to 100
Switches the backlight control method.
Local Dimming (High, Low): Local dimming technology controls the amount of light emitted by
the backlight for each display area. The backlight of bright area is increased and the dark area is
decreased according to the displayed content.
Off: No backlight dimming is applied.
Note
• When "Peak Luminance Control" is set to "On", you cannot select "Backlight Control".
• In Multi View (Dual) display, when right screen is selected as the target screen, it is not possible
to set Backlight control after selecting Picture Mode. The Backlight control setting is same on
both screens.
47, 48 for each setting.
OSD Menu 39