Setting System Authentication Information - Samsung OfficeServ ITP-5021D User Manual

GETTING STARTED

Setting System Authentication Information

This function is used to set the IP address of the OfficeServ system connected to the IP phone and the
authentication ID and password of the IP phone. The ID and password of this function are used when initially
setting the IP phone and are not required while using the functions of the IP phone. If a function of the IP
phone(such as Lock) requests a password, enter your station password; default is 1234.
1.
Use the [
the [5. Server] menu and press
the [Enter] button.
2.
The submenus are displayed.
If the OfficeServ system is set to request
the ID and password of the IP phone,
[2. ID] and [3. Password] shall be entered.
3.
The [1. Server IP] menu is used for
verifying or changing the IP address of
the OfficeServ system. Verify the current
IP address of the OfficeServ system with
your System Administrator.
To change the IP address, enter a new
address and press the [Enter] button.
4.
[2. ID] and [3. Password] are user information
required for connecting to the OfficeServ
system.
Contact the System Administrator for
the correct ID and password.
NOTE
Page 38
∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨
]/[ ] button to move to
- The ID is composed of maximum of 16 letters or numbers(Capital and lower case
letters are not distinguished). The password is composed of maximum of 8 numbers.
The password is displayed as * when entered.
>5. Server
6. Exit
1. Server IP
2. ID
3. Password
Input ServerIP
XXX.XXX.XXX.XXX
*Input ID
SAMSUNG
*Input Password
*********
© SAMSUNG Electronics Co., Ltd.
Enter
Enter