Panasonic kx-ns0154la Installation Manual page 61

Slave CS3
Slave CS4
Slave CS5
Slave CS6
Slave CS7
Slave CS8
Assigning the Synchronizing CSs
Assigning the Master CSs
Note
When using only one IP-CS at an installation site, assign it as Master CS1 so that it can generate the clock
signal.
1. Click Setup ® PBX Configuration ® Maintenance ® Air Synchronization.
2.
From the Air Synchronization Group Number drop-down list, select the desired Air Synchronization Group
number.
3.
Click a cell in the Connection column for the registered CS to open the Command window for the port. In
the Command window, click OUS to change the status of the port to "OUS".
4.
Select the desired classification for the CS in the CS Class column.
Note
For details about other parameters on this screen, refer to the PC Programming Manual for your PBX.
5.
Click Apply.
Note
Please wait about one minute after clicking Apply to allow changes to take effect.
6.
Click the cell in the Connection column again, and click INS in the Command window to return the status
of the port to "INS".
Setting the Synchronizing CS Search Order (Primary/Secondary)
The search order of each CS can be set by the following procedure:
1. Click Setup ® PBX Configuration ® Maintenance ® Air Synchronization.
2.
From the Air Synchronization Group Number drop-down list, select the desired Air Synchronization Group
number.
3.
Click a cell in the Connection column for the registered CS to open the Command window for the port. In
the Command window, click OUS to change the status of the port to "OUS".
4.
Select the desired CS number in the Primary CS - Index and Secondary CS - Index.
Note
For details about other parameters on this screen, refer to the PC Programming Manual for your PBX.
5.
Click Apply.
Note
Please wait about one minute after clicking Apply to allow changes to take effect.
6.
Click the cell in the Connection column again, and click INS in the Command window to return the status
of the port to "INS".
Master CS1(B)
Master CS1(A)
both Master CS1(A) and Master CS1(B)
both Master CS1(A) and Master CS1(B)
both Master CS1(A) and Slave CS1
both Master CS1(B) and Slave CS2
5 Appendix
Installation Guide 61