Clearing The Stored Scan Data; After Site Survey - Panasonic kx-ns0154la Installation Manual

5 Appendix

5.5.5 Clearing the Stored Scan Data

If you are using a KX-TCA185/KX-TCA285/KX-TCA385, you can skip this procedure.
Using the KX-WT125/KX-WT126 (for North America)
WXYZ
While pressing 1 and 9, insert the batteries,
and hold down 1 and 9 for 2 seconds.
Using the KX-TD7685/KX-TD7695/KX-TD7696/KX-TCA155/KX-TCA175/KX-TCA256/
KX-TCA275/KX-TCA355/KX-TCA364/KX-WT115
Press 1, 9, and POWER
for more than 2 seconds.

5.5.6 After Site Survey

After obtaining the proper measurement results, it is necessary to exit Radio Signal Test mode before
connecting the CS to the PBX.
1.
Hold down the POWER button on the PS until the PS is off.
2.
Disconnect the CS from the AC adaptor, battery or PoE to stop supplying electricity.
3.
Switch all DIP switches on the CS from ON to OFF.
52 Installation Guide
GHI
GHI