Panasonic WJ-SX650 Operating Instructions Manual page 79

Wj-sx650 series matrix switcher operating instructions wj-sx650
Hide thumbs Also See for WJ-SX650:
Table of Contents

Advertisement

Function
Auto pan
• Activates the auto pan.
• Reverses the auto pan
range.
• Sets the start point of auto
pan.
• Sets the end point of auto
pan.
Auto mode
• Sequence
• Sort
• Auto pan
• Patrol
BW Mode Switching
• Changes to the BW mode.
• Changes to the color mode.
• AUTO 1
• AUTO 2
AUX 1/2
<Latch mode>
• AUX 1 (or 2) ON
• AUX 1 (or 2) OFF
<Momentary mode>
AUX 1 (or 2) ON
Wiper ON
WV-CU950/650
Open "Auto Pan Setup" menu.
[F1]
[F2]
[F3]
[F4]
Open "Auto Mode" main
menu. →
[F1]
[F2]
[F3]
[F4]
Open "BW Mode" main menu.
[F1]
[F2]
[F3]
[F4]
[AUX1 (or 2) ON]
[SHIFT] + [AUX1 (or 2) OFF]
[AUX1 (or 2) ON]
(Keep pressing.)
[WIPER]
(Keep pressing.)
WV-CU360C/CJ
[SHIFT] + [CAM FUNC] four
times
(AUTO MODE setting menu
appears on the monitor. )→
[1]
Not available
Not available
Not available
[SHIFT] + [CAM FUNC] four
times (AUTO MODE setting
menu appears on the monitor.
)→
[3]
[2]
[1]
Refer to p.
41
Patrol.
[SHIFT] + [CAM FUNC] two
times (BW setting menu
appears on the monitor. )→
[1]
[2]
Not available
Not available
[SHIFT] + [AUX1 (or 2) ON]
[SHIFT] + [AUX1 (or 2) OFF]
[SHIFT] + [AUX1 (or 2) ON]
(Keep pressing.)
[SHIFT] + [WIPER] (Keep
pressing.)
Note
WV-CU360C/CJ:
Pressing [AUTO PAN] is also
available.
WV-CU950/650:
If the camera has only one
AUTO mode, press this but-
ton.
WV-CU950/650, WV-
CU360C/CJ:
• Mode setting is determined
by the DIP switch settings of
camera or auxiliary device
(receiver, etc.).
• To activate events
(sequence, etc.), set the
camera or auxiliary device
to the latch mode. (Refer to
the operating instructions of
camera.)
WV-CU950/650, WV-
CU360C/CJ:
When you release the but-
ton(s), auxiliary control
becomes OFF.
WV-CU950/650, WV-
CU360C/CJ:
When you release the but-
ton(s), wiper control becomes
OFF
79

Advertisement

Table of Contents
loading

Table of Contents