Displaying The Connection Wizard - Canon EOS-1D X Mark II G Instruction Manual

Displaying the Connection Wizard

This section describes the process following the connection
instructions. If an error is displayed, see "Troubleshooting Guide" in
Chapter 9 (p.87) and check the settings.
Pressing the shutter button or other camera controls during

configuration using the connection instructions will close the
connection instructions. Do not press the shutter button or other
controls until configuration is finished.
Under the [52] tab, set [Auto power off] to [Disable]. If auto power

off is activated, the connection instructions will be closed during the
configuration process.
16
Select [Communication settings].
1
Under the [53] tab, select

[Communication settings], then
press <0>.
Select [Network settings].
2
Set [Communication func] to

[Enable], then select [Network
settings].
Select [Connection settings].
3