Canon EOS-1D X Mark II G Instruction Manual page 89

11: Connection target not found
In the case of [EOSUtility], is EOS Utility running?

Start EOS Utility and re-establish the connection (p.40).

In the case of [Smartphone], is Camera Connect running?

Establish a connection using Camera Connect (p.60).

12: Connection target not found
Are the target device and access point turned on?

 Turn on the target device and access point, then wait a while. If a
connection still cannot be established, perform the procedures to
establish the connection again.
21: No address assigned by DHCP server
What to check on the camera
On the camera, IP address is set to [Auto setting]. Is this the

correct setting?
If no DHCP server is used, configure settings after setting the IP

address to [Manual setting] on the camera (p.106).
Responding to Error Messages
89