Displaying The Connection Wizard - Canon EOS-1D X Instruction Manual

Displaying the Connection Wizard

This section's explanation follows the flow of the connection
instructions. If an error is displayed, see "Troubleshooting" in Chapter 8
(p.83) and check the settings.
Pressing the shutter button or other camera controls during

configuration will cause the connection instructions to close. Do not
press the shutter button or other controls until configuration is
finished.
On the [52] tab, set [Auto power off] to [Disable]. If auto power off

is activated, the connection instructions will close during the
configuration process.
12
Turn the camera on.
1
Display the communication
2
functions menu.
On the camera, press the <7>

button.
On the [53] tab, select

[Communication settings] and
press <0>.
Select [Communication func].
3
Set [Communication func] to

[Enable], and then press <0>.

[Network settings] is now available.
Select [Network settings].
4