B 2.2.3 Acknowledgment In The Message Line And Message List - ABB Freelance 2000 Manual

Section B

B 2.2.3 Acknowledgment in the message line and message list

Depending on configuration, acknowledgment in the message line is by means of visual
acknowledgment or normal acknowledgment. The type of acknowledgment which is active is
indicated by the button: VA for visual acknowledgment, A for normal acknowledgment.
Only normal acknowledgment is available in the message list. The operating dialog provides
buttons for this.
Acknowledgment influences the message status and the following combinations can be
configured:
Acknowledgment
level
1
2
3
Message Coming
Message Going
FS
ES
FL
ST
nv.
A
Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, www.ssacsales.com, 800-349-5827
B-12
Message Message
Coming Coming
not A A once
FS + FL FS + ST
FS + FL FS + ST
FS + ST
The message at the process station is active.
The message at the process station is inactive.
The priority and the state of the message are displayed as a full symbol
to the left in the message list. The color of the symbol depends on the pri-
ority.
The priority and the state of the message are displayed as an empty
symbol to the left in the message list. The color of the number and the
sign depends on the priority.
The display flashes.
The display is static.
The message is not visible.
The message was acknowledged.
Message
Going
not A
ES + FL
ES + FL
nv. nv.
Messages and Hints
Message Message
Going Going
A once A twice
ES + ST nv.
nv. nv.
nv. nv.