Connecting The Lan Cable, Telephone Line Cable And Power Cord - Panasonic DX-600 Network Fax Manual

Connecting the LAN Cable, Telephone Line Cable and Power Cord

s Power Cord
Plug the supply cord into the mains AC socket outlet. Connect the supply cord coupler into the mains supply
inlet on the rear of the machine.
Warning: This apparatus must be properly earthed.
Do not modify the AC outlet.
s Telephone Line Cable
Plug one end of the telephone line cable into the telephone jack supplied by the telephone company and the
other end into the LINE jack on the left side of the machine.
s Ethernet LAN Cable
10Base-T/100Base-TX Ethernet Hub
NOTE
40
RJ-11C Telephone Jack
1. Your machine uses little power and you should keep it ON at all times. If the power is turned
OFF for too long, the clock contents may be lost.
2. The shape of the telephone line cable and power cord may differ depending on each country's
regulation or specification.
3. The Telephone Line Cable Adapter is available in certain countries only.
Power Cord (Included)
Telephone Line Cable (Included)
Ethernet LAN (10Base-T/100Base-TX)
Cable (Not included)