Table of Contents
Advertisement
Direct Transmission
If your machine's memory is full or you wish to send the document immediately, use Direct Transmission.
Manual Number Dialling (Direct Transmission)
To dial the telephone number manually, follow the steps below.
1
2
3
1
4
Enter a telephone number from the keypad.
Ex:
5 5 5 1 2 3 4
5
Your machine starts to dial the telephone number.
NOTE
1. If you need a special access number to get an outside line, dial it first then press
enter a pause (represented by a "-") before dialling the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling,
press
The dialling mode will be changed from Pulse to Tone after dialling the digit "/".
Ex: 9 PAUSE * 5551234
3. To stop the transmission, press
The display shows:
COMMUNICATION STOP ?
1:YES 2:NO
Press
the printout mode setting of the Communication Journal.
Sending Documents via Telephone Line
Set document(s) face down.
8
9
(represented by a "/").
to stop the transmission. The Communication Journal will not print out regardless of
1
ENTER STATION(S)
THEN PRESS START 00%
MEMORY XMT=ON
1:OFF 2:ON
ENTER STATION
PRESS START TO DIAL
5551234❚
* DIALLING *
5551234
.
STOP
00%
to
PAUSE
111
Advertisement
Table of Contents
