Subject Line Entry
General Description
Your machine will automatically add the Default Subject information that was entered during the User
Parameter setup, to the Subject Line of all outgoing emails.
If you would like for the machine to prompt you for the Subject before each email transmission, change the
Fax Parameter No. 159 (SUBJECT LINE ENTRY) to "2:Valid".
Sending Email with Subject Line Entry
1
2
3
4
154
Set document(s) face down.
Enter the email addresses by any combination of the
following methods:
• One-Touch Dialling
• Abbreviated Dialling
• Directory Search Dialling, press
email address is entered.
• Manual Number Dialling, press
station is entered (up to 70 addresses).
Ex:
Enter the Subject (max. 40 characters and digits) by using
the Character keys. (See page 14) To use the Default
Subject pre-programmed in the User Parameter, just
press
.
START
Ex: FAX from Mr. Jones
after each
SET
after each
SET
ENTER STATION(S)
THEN PRESS START 00%
<01>(Station name)
abc@panasonic.com❚
ENTER SUBJECT OR
PRESS START TO SEND
SUBJECT
FAX from Mr. Jones