Philips SOPHO SuperVisor 25 Engineer's Manual page 12

For systems with SSW 300, this means that the operator passwords will be validated by
the CPU of the ISPBX. More than one password can be specified per console, which
means that each operator can have it's own password. On the console, passwords can be
entered, updated and deleted.
If a password has been forgotten a new password can be assigned to the operator DNR
(or to a USIN, User Identification Number) with an OM command.
For systems with SSW 735, 740 and 8xx the password is defined in the signalling data. If
more than one password per system is required, more signalling groups have to be created
each containing its own password. These signalling groups can be assigned to the different
Supervisor circuits.
• Queues
Model 25 and model 35 are able to handle the queue structure as defined in the system.
• Series Call
The operator can connect an external party to several internal parties in series.
• Speed Dialling Keys (only model 35)
The operator can program the 12 keys of the softkey menu with important numbers (e.g.
alarm and emergency numbers). By pressing the 'speed dialling menu' key and after that
one of the 12 pre-programmed softkeys a call is setup.
• Status display
The status (with busy indication) of extensions can be displayed in pages of 100 extensions.
By means of the keys SD1, SD2 and SD3 the pages 1, 2 and 3 are selected. By pressing
'Shift' SD1, 'Shift' SD2', or 'Shift' SD3 the pages 4, 5 or 6 are selected. The DNRs of the
extensions are ordered on the display in 10 rows of 10 extensions, in such a way that the
Least Significant Digit (LSD) of a DNR is not shown. If (during programming) in a DNR the
LSD is left out, that (incomplete) DNR applies to ten DNRs. In the field behind every
(incomplete) DNR, the status of the 10 extensions is displayed in the following way:
- last digit of the extension normal video : extension is ringing.
- last digit of the extension in inverted video : extension is busy or off hook.
- full stop '.' displayed in stead of the last digit : number unobtainable (not existing
extension number, extension out of service).
Also a row of ten trunk lines can be monitored, instead of a row of ten extensions.
• Voice Synthesis for Instruction
Voice synthesis for instruction is build-in in the console. The console generates a voice
signal if a key is pressed. By this means a visually handicapped operator can learn to locate
the functions of the keys.
• Voice Synthesis for Call Handling
Model 25 is able to do 'call handling' voice synthesis for visually handicapped operators.
Model 35 does not support Voice Synthesis for Call Handling but a braille unit is used to
communicate with the visually handicapped operator. Model 25 is not able to control a
braille unit.
A large number of displayed items on the display are converted to spoken messages.
10