NEC D3 Quick Start Manual page 53

8. After the installation process has copied
all PathManager files and configured the
PathManager installation, the
InstallShield Wizard Completed window
will appear. Click Finish to close the
installation wizard.
9. After completing the installation process, the
server will need to be restarted. Click Yes to
restart the server immediately or click No to
perform any other necessary tasks before
restarting the server.
10. After the server restarts, the storage array
can be reconnected to the server and any
additional PathManager configuration
activities can be performed on the server if
needed.
At this point, the PathManager software installation is complete and PathManager should recognize any
disk subsystems and paths to the array needed to operate normally.
To learn how to monitor PathManager functionality or perform any additional multipath configuration
tasks, please refer to the Storage PathManager documentation contained on the Storage Manager CD.
© 2009 NEC Corporation of America. NEC is a registered trademark of NEC Corporation.
Other product or service marks mentioned herein are the trademarks of their respective owners. PN# 456-01812-001
NEC D3/D4 Quick Start Guide
All Rights Reserved.
51