NEC D3 Quick Start Manual page 36

5. After any necessary disk initialization
process has been completed, the new
logical drives should be visible from
within the Disk Management window.
The logical disks are now ready to be
configured for use on the application
server and formatted as needed.
If the logical drives do not appear on the
application server, check all physical
connections and restart the application
server.
If they still do not appear or were not
created during the array initialization
process, attempt to create and bind
logical drives through the Storage
Manager client as shown in the
Configuring Logical Disks and Pools
section below.
NEC D3/D4 Quick Start Guide 34