Table of Contents
Advertisement
6 Using the System
↓
6
10
6
10
WEB settings
Main
Sub
↓
6
11 11
6
11
User settings
Main
Sub
↓
2
5
2
5
Cut-off/Data backup
Main
Sub
(1) Manual cut-off
(2) Data backup
(3) Restore
↓
END
Note 1
Settings are necessary when you would like to monitor operation accumulated time only and
distribution ratio is not needed.
Note 2
Settings are necessary only when air-conditioners include a 3-Way type unit.
Note 3
Make settings even when no distribution is made, if you would like to control units as a bundle of
the group of tenants.
Note 4
Settings are necessary only when the indoor unit has a interface adaptor and is set at almighty.
Note 5
Settings are necessary only for the indoor unit set at almighty.
Note 6
Immediately before delivery, execute "Clear accum.data" to clear total data taken during test runs.
When clearing the test run data after storing it, make "Cut-off" (
Note 7
Make the settings when you would like to operate the unit by optional grouping.
Note 8
When using the unit along with the system controller or ON/OFF-controller, the controller-side
control classifi cation needs to be taken into consideration.
The system controller or ON/OFF-controller-side zone varies as varying central addresses from
the Intelligent Controller.
Note 9
Settings are necessary only for interface adaptor.
Note 10 Settings are unnecessary for the simple distribution as they will be taken into consideration in
calculation only for the loaded distribution.
Note 11 Always set the mode at "NO (Normal)".
Note 12 Do not make any initialization imprudently as it may cause missing of all the set and cut-off data.
Note 13 The system works only with the backup PC card inserted, which is separately available.
Note 14 Always manually make the cut-off processing in advance to vary the method of distribution.
Note 15 Although the touch panel is adjusted before factory shipment, calibrate deviations if any.
Note 16 Do not restore any data imprudently as it may return them to their backed-up status.
Note 17 Settings are necessary when you would like to control/monitor the unit via network.
Air
conditioner
operation
only
Note 17
Note 17
Note 6
Note 13
Note 13 and 16
21
Displaying
Displaying
distribution
distribution
ratios
ratios
(simple
(loaded
distribution)
distribution)
2
2
Main
Displaying
Displaying
energy
energy
usage
usage
(simple
(loaded
distribution)
distribution)
5
5
) manually.
Sub
Hide quick links:
Advertisement
Table of Contents
