Alarm is displayed.
Alarm indication (e.g.)
Defective indoor unit No.
TEST is displayed.
• If you need to contact for servicing, check the back cover of the operating instructions for indoor
units or outdoor units.
If any of the following alarm
indications appears, stop operation
once and restart approx. 1 minute
later.
(Alarm indication, off)
[•E04 •E06 •P10 •P20 •H06]
→ If the indication does not reappear, use
the unit.
→ If the indication reappears or an
alarm indication other than the above
(combination of numbers and characters
such as E, F, H, L and P) appears, stop
operation, turn off the circuit breaker and
consult the dealer of purchase about
alarm indication, Model No. and indoor
unit No.
Set the test operation to [OFF].
P ress and hold the 3 buttons for 4
seconds or more simultaneously.
([Maintenance func] screen is displayed)
S elect [5. Test run] and press
S elect [All] and press.
S elect [OFF] and press
P ress
→
Do not operate the item other than
[Test run].
, ▼.
.
to fi nish.
63
(EN)