Troubleshooting - Panasonic CZ-64ESMC3 Operating Instructions Manual

Troubleshooting

If operation does not start by pressing
Check the following before asking for repair.
Cannot disable
the remote control
operation (Remote
prohibited)
Blackout?
Is the circuit
breaker turned off?
Is [Assigning]
blinking?
Weekly timer does
not work.
62
(EN)
...
 Cannot perform
using in the remote control mode.
(P.8)
 After recovery from blackout, press
again.
→ If operation does not start, turn off the
circuit breaker and consult the dealer of
purchase about the symptom and Model
No.
 After checking with the responsible
manager, turn on the circuit breaker,
and press again.
→ If operation does not start, turn off the
circuit breaker and consult the dealer of
purchase about the symptom and Model
No.
 After blinking stops, press
→ If operation does not start, turn off the
circuit breaker and consult the dealer of
purchase about the symptom and Model
No.
 Is the weekly timer set to
The weekly timer does not work if set to
[disable]. Check Timer Reservation
(P.21).
 Is the current date and time correct?
If the current time is not correct, the unit
operates at unexpected time.
operation when
again.
[enable]?