Setting Operation Mode, Temperature, Fan Speed And Airflow Direction - Panasonic CZ-64ESMC3 Operating Instructions Manual

Setting Operation Mode,
Temperature, Fan Speed and
Airflow Direction
Make each setting for the selected indoor unit.
1
Display the operation screen.
Press
2
Select the item to set.
Press ◄ ►.
• When the cursor is not visible, press
3
Set the selected item.
Press ▲▼ →
Note
 Operation modes that cannot be set are not displayed.
 The airflow direction display differs from the actual flap angle.
 If no operation is performed for a certain period of time, the back light turns off to
save electricity. (Press any button for illumination.)
 The temperature range that can be set varies depending on the model.
 The temperature range can be changed using this unit. (P.32)
 Some models do not display the airflow direction.
 For [All] or [Zone], one typical indoor unit setting is displayed as an example. Not
all of the indoor units have the same setting as displayed.
18
(EN)
.
.
(The cursor disappears.)
The unit returns to the
standby screen.
Selected indoor unit
.
[Vent] (Ventilation) (P.57)/
[Misc] (Other) (P.61)
(Prohibit R/C) (P.59)