*To display each item, see steps 1 to 2 on the previous page.
Next fi lter cleaning time
To check the cleaning timing
3
Select the target.
◄ ► (or
) → ▲ ▼ →
• Press ◄ ► to select [All] or [Zone], and
press ▲ ▼ to select [Group].
4
Confi rm the operation time to the
next cleaning.
(Press 2 times to fi nish.)
When cleaning is immediately
necessary
The screen shown on the right is
displayed.
• Press ◄ ► to select [YES], and press
.
(Press 2 times to fi nish.)
Note
Depending on the model, [Filter info]
cannot be used. In this case, a message
is displayed as shown on the right.
When the filter cleaning time comes, the
icon is displayed on the standby screen.
Clean the filter if this icon appears.
(See P.29 step 3.)
47
(EN)