Specifications For Combined Adapters; Aj65Mbtl1N-16Dt Cc-Link Embedded Combined Adapter - Mitsubishi Electric CC-Link User Manual

4 SPECIFICATIONS FOR CC-LINK EMBEDDED I/O ADAPTER

4.3 Specifications for Combined Adapters

4.3.1 AJ65MBTL1N-16DT CC-Link embedded combined adapter

Form
Specification
Input specification
Number of input points
Isolation method
Rated input voltage
Rated input current
Operating voltage range
Max. simultaneous input
points
ON voltage/ON current 14V or higher/3.5mA or higher
OFF voltage/OFF current
Input resistance
Response time OFF ON
ON OFF
Input type Positive common (Sink type)
Wiring method for common
CC-Link station type
Number of occupied stations
I/O adapter Voltage
power supply Current
Noise durability DC type noise voltage 500Vp-p, noise width 1
simulator condition)
Dielectric withstand voltage 500V AC for 1 minute between all DC external terminals and ground
Insulation resistance 10M
terminals and ground
Weight
External wiring system
4 - 9
8 points Number of output points
Photocoupler Isolation method
24V DC Rated load voltage
Approx. 7mA
Operating load voltage range
19.2 to 26.4V DC Max. load current
(ripple ratio: within 5%)
Max. inrush current
50% (See section 1.3)
Leakage current at OFF
Max. voltage drop at ON
6V or lower/1.7mA or lower
Output type
A pprox. 3.3k Ω
Protection functions
1.5ms or lower (at 24V DC) Response
time
1.5ms or lower (at 24V DC)
External
Power supply
for output
Surge suppression
1 station 32 points assignment (use 16 points)
20.4 to 26.4V DC(ripple ratio: within 5%)
50mA or lower (when all points are ON at 24V DC) Not including external load current
or higher, measured with a 500V DC insulation resistance tester between all DC external
Ω
44-pin, 2-row, 2mm-pitch pin header
DC input transistor output combined adapter
AJ65MBTL1N-16DT
Output specification
19.2
to 26.4V DC(ripple ratio: within 5%)
0.7A 10ms or lower
0.1V or lower (TYP)0.1A
0.2V or lower (MAX)0.1A
Overload, over-voltage and overheat
OFF ON
ON OFF
(rated load, resistive load)
Voltage
19.2 to 26.4V DC (ripple ratio: within 5%)
Current
(When all points are ON at 24V DC)
Not including external load current
16 points/1 common
Remote I/O station
μ s, noise carrier frequency 25 to 60Hz(noise
0.03kg
8 points
Photocoupler
24V DC
0.1A/point
0.8A/common
0.1mA or lower
Sink type
protection
1ms or lower
1ms or lower
5mA or lower
Zener diode
MELSEC-A
Surface shape
4 - 9