Huawei espace 7810 Administrator's Manual page 59

Huawei IP Phone eSpace
7810&7820&7830&7850&7870&7803X
Administrator Guide
Assume that the settings in
When the IP phone receives a call, the IP phone receives the Alert-Info message. The phone
attempts to download the ring tone file from http://www.example.com/sounds/moo.wav. If the
ring tone file is successfully downloaded, the IP phone plays it. Otherwise, the IP phone plays
the Ring3.wav file.
Configuration File
Table 2-26 eSpace 7850, 7830, 7820 and 7810 parameters in the configuration file for distinctive
ring tones
Section Header and
Path
[ AlertInfo0 ]
path =
/config/Setting/Setting.
cfg
Parameters for the other nine Internal Ringer Text parameters are the same as those for
the first one. The only difference is the numbers in the headers. The second header is
[ AlertInfo1 ], the third header is [ AlertInfo2 ], and the nth header is [ AlertInfo(n-1) ].
Table 2-27 eSpace 7870 parameters in the configuration file for distinctive ring tones
Section Header and
Path
[cfg:/phone/config/use
r.ini,reboot=1]
Issue 01 (2011-12-31)
Figure 2-23
Parameters
Text
Ringer
Parameters
AlertInfo0.Text
AlertInfo0.Ring
er
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Single IP Phone Configuration
take effect.
Permitted
Values Description
Character This parameter corresponds to
string the first Internal Ringer Text
parameter. The parameter is
left blank by default.
Integer Local ring tone that is
associated with the first
Internal Ringer Text
parameter. The value 1
indicates Ring1.wav, the value
2 indicates Ring2.wav, and the
value n indicates Ringn.wav.
Default value: 1
Permitted
Values
Character
string
Integer
Description
This parameter corresponds
to the first Internal Ringer
Text parameter. The
parameter is left blank by
default.
Local ring tone that is
associated with the first
Internal Ringer Text
parameter. The value 1
indicates Ring1.wav, the
value 2 indicates
Ring2.wav, and the value n
indicates Ringn.wav.
Default value: 1
53