Huawei espace 7810 Administrator's Manual page 12

Huawei IP Phone eSpace
7810&7820&7830&7850&7870&7803X
Administrator Guide








Accessing the Web Configuration Page
Before accessing the web configuration page, connect the IP phone and computer to the same
hub or switch. If there is no hub or switch, connect the computer to the PC port of the IP
phone.
To access the web configuration page, proceed as follows:
1.
2.
3.
4.
Issue 01 (2011-12-31)
Status: Set the network status, firmware version, MAC address, and other information
on this tab page.
Account: Set IP phone's SIP account parameters on this tab page. eSpace 7870 and 7850
supports a maximum of six accounts, eSpace 7830 and 7820 supports a maximum of
three accounts, and eSpace 7810 supports a maximum of two accounts.
Network: Set basic network parameters (such as the WAN port and LAN port) and
advanced network parameters (such as LLDP, VLAN) on this tab page.
Phone: Set the language, time, call forwarding, do-not-disturb (DND), hold, transfer, and
other functions, and set the DSS keys, voice, ring tone, signal tone, and dialing rules. For
eSpace 7850 and 7830, the soft key layout, keys on an expansion module, and short
messages can also be configured on this tab page.
DSS Key: Set DSS keys on this tab page. This tab page is available only to eSpace 7870.
The DSS keys of other IP phones are configured on the Phone tab page.
Contacts: Set the local phone book, blacklist, number dialing on web pages, remote
phone book, and LDAP. The remote phone book and Lightweight Directory Access
Protocol (LDAP) address book are supported only by eSpace 7870, 7850, 7830 and
7820.
Upgrade: Set TR069 parameters for manual upgrade and automatic upgrade.
Security: Change the password of an administrator or a common user, and upload the
trust certificates to the TLS/SSL client and server.
Start the web browser.
To view the IP address of the IP phone, press the OK key when the phone is connected
to the network.
Enter an IP phone's IP address in the address box, and press Enter.
The IP address is in the format xxx.xxx.xxx.xxx, in which xxx ranges from 0 to 255. For
example, 10.10.10.1.
Enter admin in the User name text box, and enter the administrator password (default:
admin) in the Password text box. Then click OK, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Single IP Phone Configuration
Figure 2-1.
6