Huawei eSpace 6805 Administrator's Manual page 28

Huawei IP Phone eSpace
6805&6810&6830&6850&6870
Administrator Guide
Field
iLBC payload type
Eventlist BLF URI
Special Feature
NOTE
RTT is short for round-trip time.
PRACK is short for Provisional Acknowledgment.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. After the IP phone is restarted successfully, log in to the Web page of the IP phone and
Only the first three parameters are mandatory. You are recommended not to change the
parameter values unless otherwise required.
Issue 01 (2011-12-21)
Description
 The iLBC audio CODEC frame size is 20 ms in the case of 15.2
kbit/s.
iLBC audio CODEC payload type. The value ranges from 96 to 127.
The default value is 98.
The IP or domain name for the event list BLF. The SIP sever is
required to support this feature.
The default value is Standard. Select the value to meet special
requirements of softswitch vendors.
Click Yes for Account Active to activate the account.
Enter the IP address of the registration server in the SIP Server text box.
Enter the account ID of the SIP user in the SIP User ID text box.
If the SIP server has authentication information, enter the authentication ID and
password in the Authenticate ID and Authenticate Password text boxes.
Enter the user name that is displayed on the called IP phone in the Name text box.
Whether the called IP phone can display the name depends on the types of the SoftCo
and the called IP phone. If the version of the SoftCo is V100R001C03 or later and the
called IP phone is an SIP phone, the name can be displayed.
Enter the registration duration in the Register Expiration text box according to the
requirements of the server. Generally, the registration duration is set to 5 minutes when
the IP phone works with the SoftCo.
Enter the port number for transmitting SIP messages in the local SIP port text box. The
default port number is 5056. If the IP phone uses multiple lines at the same time, ensure
that the values of local SIP port for account 1 and account 2 are different. Otherwise,
the registration may fail.
If you want to set the codec that is used by the IP phone, enter the codec in the
Preferred Vocoder: (in listed order) text box at the bottom.
Click Update to save the configuration, and click Reboot to restart the IP phone to make
the configuration take effect.
click STATUS to view the registration status of the account in the Registered area.
----End
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Configuration and Loading Files
23