Huawei eSpace 6805 Administrator's Manual page 111

Huawei IP Phone eSpace
6805&6810&6830&6850&6870
Administrator Guide
3.
4.
5.
When entering the file name to be saved, you must add the extension name. This is because
the Wireshark does not add the extension name when exporting files. If the file in Plain text
format is exported, you must add the extension name .txt. If the file in Post Script format is
exported, you must add the extension name .ps. If the file in CSV format is exported, you
must add the extension name .csv. If the file in PSML or PDML format is exported, you must
add the extension name .xml. This is because the extension name PSML or PDML cannot be
recognized.

1.
Figure 5-51 Print dialog box
2.
3.
4.
Issue 01 (2011-12-21)
Enter the file name to be saved.
Select the output packet range in Packet Range.
Select the output packet format in Packet Format.
Exporting Files Through Print
Exporting files through Print is similar to exporting files through Export, but there is a
slight difference. The steps are as follows:
Choose File > Print to display the Print dialog box, as shown in
Select the output packet format in Printer.
Select Output to file and enter the file name to be saved in the text box. Adjust the
extension name according to the actual situation.
The settings in Packet Range and Packet Format are the same as those in Exporting
Files Through Export.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Appendix
Figure 5-51.
106