Panasonic AG-3DA1E Operating Instructions Manual page 55

4
When the screen below appears, set the
time code value.
Tilt the Operation lever in the
and select time code value.
TC PRESET
0 0 h 0 0
TC
Tilt in the direction to move to the next digit,
and tilt in the directions again to select
value.
TC PRESET
1 0 h 0 0
TC
You can reset the time code to zero by
pressing RESET button.
BARS SHUTTER
CH 1 SELECT CH 2
INT （L）
INPUT 1
INPUT 2
AUDIO
COUNTER RESET
MIX
RESET button
5
Push the Operation lever when you have
finished setting the time code.
directions
m 0 0 s 0 0 f
m 0 0 s 0 0 f
SPEED SEL
1 INPUT 2
INT （R） ON
OFF
INPUT 2
MIC POWER +48V
WFM
EVF DTL ZEBRA
6
Tilt the Operation lever in the
to move to YES, and push the Operation
lever.
TC PRESET
TC
PRESET?
YES
NO
With this unit, the time code value is adjusted
in accordance with the format and frame rate.
For this reason, bear in mind that making a
change in the format or frame rate may result in
discontinuity from the last time code value of the
previous recording. (Only when SYSTEM FREQ
is set to 59.9 Hz)
Recording format
1080/4P
direction
Time code
adjustment
Adjustable in
4-frame increments
55