Power Sources; Using The Battery; Using The Ac Adaptor - Panasonic AG-3DA1E Operating Instructions Manual

Power sources

Using the battery

Installation
Insert the battery until it clicks into place.

Using the AC adaptor

Installation
1
Insert the DC cable's battery connector
until it clicks into place.
2
Connect the AC power supply cable.
Connect the AC power supply cable in the
order and
4
.
DC cable's battery
connector
Insert it all
the way in.
Removal
1
Set the POWER/Mode selector switch to
OFF, and check that the mode lamps are
off. (Page 25)
2
Remove the battery while pressing the
battery release button.
• Support the battery with your hand to
ensure that it will not fall.
Battery release button
Removal
1
Set the POWER/Mode selector switch to
OFF, and check that the mode lamps are
off. (Page 25)
2
Remove the DC cable's battery connector
while pressing the battery release button.
3
Disconnect the AC power supply cable
from the power outlet.
CAUTION:
• Disconnect the AC power supply cable from
the power outlet when the unit is not going
to be used.
• When the AC power supply cable is
disconnected from the power outlet, the
power lamp on the AC adaptor remains
lit for a while then shuts off. This is not a
malfunction.
Mode lamps
CAMERA
PB
POWER
ON
OFF