Switching Audio Input; Using The Built-In Microphone; Using An External Microphone And Audio Equipment - Panasonic AG-3DA1E Operating Instructions Manual

Switching Audio Input

During shooting, you can record up to two
channels of sound. You can also switch the input
sound to be recorded on each of the channels to
the built-in microphones, external microphones or
audio equipment connected to camera.
CH1 SELECT switch
CH 1
INPUT 1/2 (MIC POWER +48V) switches

Using the built-in microphone

1
Switch the CH1 SELECT switch to INT (L).
• Audio from the built-in microphone Lch is
recorded to audio channel 1.
2
Switch the CH2 SELECT switch to INT (R).
• Audio from the built-in microphone Rch is
recorded to audio channel .
48
CH2 SELECT switch
BARS SHUTTER SPEED SEL
SELECT CH 2 1 INPUT 2
INT （L） INT （R） ON
INPUT 1 INPUT 2 OFF
INPUT 2
MIC POWER +48V
AUDIO
COUNTER RESET WFM
MIX EVF DTL ZEBRA
Using an external microphone and
audio equipment
1
Connect an external microphone or audio
equipment to the INPUT 1/2 (XLR 3-pin)
terminals. (Page 66)
INPUT 2 terminal
1 2 3
HANDLE ZOOM
2
Use the INPUT 1/2 switches to switch the
audio input.
INPUT 1 switch INPUT 2 switch
LINE: (audio equipment is connected)
Input level is 0 dBu.
MIC: (an external microphone is
connected)
Input level is –50 dBu.
You can change the input level to –60 dBu
in the setup menus, RECORDING SETUP
screen MIC GAIN1 and MIC GAIN. (Page
80)
Be aware that sensitivity will be higher if
you choose –60 dBu so you will record
more noise.
INPUT 1 terminal
OFF ON
PUSH