Review Program Flow
The basic program flow needed to set up Strata CTX is shown below. The figure displays the most critical
programs in the left column and migrates right to optional programs. Also, programming flows from
specific (left) to general (right).
Card Assignment
(Program 100)
Create ILGs
(Program 304)
Create OLGs
(Program 306)
Recommended*
Planning the following before
proceeding.
Flexible Numbering Plan
(Program 102):
Trunk Group Access Plan
Station Range Plan
Create COS Plan (up to 32)
(Program 103)
Create DRL (up to 16)
(Program 111, 532~533)
Define FRL and QPL
meanings (up to 16)
*Planning out these details
in advance enables Strata CTX
setup to proceed smoothly.
Strata CTX Programming - Part 1: Getting Started 11/03
LS Trunks
GS Trunks
TI Trunks
Tie Lines
FX Lines
PRI Lines
BRI Lines
DKT Stations
STD Stations
VM Ports
Attd Positions
Pilot DN's (ACD)
Door Phones
BRI Lines
Create Station Links
Hunt Group
Paging Group
Call P.U. Group
Park Orbits
Paging Devices
Strata CTX Programming Guidelines
Step 3: Program CTX for First Time
Admin
Services
LCR/TR
System Program
5862
1-11