Braking Module Internal Activation Threshold Brake Chopper; Bo: Digital Braking Module: Pre-Alarm I2T Shutdown; Bo: Digital Braking Module Fault / Dig Bm Fault; Bo: Digital Braking Module Pre-Alarm Overtemperature - Siemens SINAMICS G150 Manual

2 Parameters
2.2 List of parameters
p3683 Braking Module internal activation threshold brake chopper / BM int act thresh
B_INF Can be changed: C2(1)
Data type: FloatingPoint32
P-Group: Converter
Not for motor type: -
Min
110.00 [V]
Description: Sets the activation threshold for the braking chopper.
Note: The activation threshold is only effective if the "Device supply voltage reduced" function (p0212.0 = 1) has been
activated!
r3685 BO: Digital Braking Module: Pre-alarm I2t shutdown / Dig BM A I2t shutd
B_INF Can be changed: -
Data type: Unsigned32
P-Group: -
Not for motor type: -
Min
-
Description: The binector output uses a 1 signal to indicate that 80 % of the highest permissible I2t value has been reached in the
Braking Module.
r3686

BO: Digital Braking Module Fault / Dig BM Fault

B_INF Can be changed: -
Data type: Unsigned32
P-Group: -
Not for motor type: -
Min
-
Description: The binector output uses a 1 signal to indicate an overcurrent fault or an I2t shutdown in the Braking Module.
r3687 BO: Digital Braking Module pre-alarm overtemperature / Dig BM A overtemp
B_INF Can be changed: -
Data type: Unsigned32
P-Group: -
Not for motor type: -
Min
-
Description: Displays a fault due to the excessively high temperature.
1 signal:
The connected temperature sensor (X21.1, X21.2) signals an overtemperature.
Recommend.: Measure the braking resistor temperature using the temperature sensor.
r3688 BO: Braking Module internal overtemperature shutdown / BM int temp shutd
B_INF Can be changed: -
Data type: Unsigned32
P-Group: -
Not for motor type: -
Min
-
Description: Displays the shutdown due to the excessively high temperature.
576
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
780.00 [V]
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
-
List Manual (LH2), 04/2014, A5E03263479A
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
760.00 [V]
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
SINAMICS G130/G150