Troubleshooting - Sanyo FWBP706F Owner's Manual

12.

TROUBLESHOOTING

Problem
No Power.
No Sound or Picture.
No reaction to the Remote Control. Reduce the distance to infrared sensor window.
No Audio / Video signal on the
display device via HDMI cable.
No high-defi nition video signal on
the TV screen.
Distorted picture.
Completely distorted picture or
black / white picture with Blu-ray
Disc™ / DVD Disc.
No Sound or distorted Sound.
Picture freezes momentarily during
disc playback.
Cannot play back a disc.
"BD-ROM Data(USB) Check"
message appears when attempting
to play a Blu-ray Disc™.
EN
Check if the AC Power cord is properly connected.
Try another Power outlet.
Unplug the AC Power cord, and wait for about 5-10 seconds. Plug it back
in and attempt to Power On the unit.
Make sure both the TV and Blu-ray Disc™ player are Turned On.
Confi rm the connections to the TV are made properly as shown in the
"CONNECTIONS" on page 12.
Check to see whether the connected TV or another device supports
HDCP. (This unit will not output a video signal unless the other device
supports HDCP.)
Confi rm that the player's AC Power cord is plugged into a Power outlet.
Check the batteries in the Remote Control and make sure they are
inserted properly by + or - symbols. See how to check the Remote
operation on page 62.
If the unit is connected to a non-certifi ed HDMI device, the Audio / Video
signal will not be sent to that device.
Make sure the display device is on the correct Input / Video source.
Perform an HDMI hotplug: Disconnecting the HDMI cable from the
display device, Turn On both devices, and replug the HDMI cable back in.
Check with the TV Manufacturer, if there are any Software updates
available for the TV.
Check to see if the HDMI cable is a certifi ed version.
Does the disc contain high-defi nition video? High-defi nition video is only
available when the disc contains it.
Does the TV support high-defi nition video? High-defi nition video is only
available when the TV supports it.
Sometimes a small amount of picture distortion may appear. This is not
a malfunction.
Make sure the disc is compatible with this unit.
Adjust the volume.
Check to see if the speakers are connected correctly.
Check the HDMI connection.
Make sure the HDMI cable is not plugged into an HDMI-DVI adapter
which does not handle Digital sound.
Check the settings in "Audio Output" menu.
Check the disc for fi ngerprints / scratches and clean with a soft cloth
wiping from the center to the outer edge.
Make sure that the Unit supports the disc.
Check the Region Code for the disc. This unit supports the following
Region Codes.
- Blu-ray Disc™: "A"
- DVD: "ALL" or "1"
For DVD-RW/-R, make sure that the disc is fi nalized.
Clean the disc.
Is the disc a newer title? This problem may be solved by software
update. Refer to "Software Update" on page 53.
Connect a USB Memory Stick fi rst, then insert the Blu-ray Disc™.
• When this unit starts loading a Blu-ray Disc™, it will check the USB
Memory Stick to which BD-Live™ contents will be saved.
56
T ip
continued on next page