Sanyo FWBP706F Owner's Manual page 43

Proxy Setting
1. Follow steps 1 to 3 in "IP setting" on page 42.
2. Use [ ] to select "Proxy Setting", then press [OK].
3. Use [ ] to select "Enable", then press [OK].
4. Use [ ] to select "Proxy Host", then press [OK].
5. "Proxy Host" setting screen will appear. Enter a Proxy address using the cursor buttons and [OK].
• After completion, select "Enter" on the Software Keyboard.
6. Use [ ] to select "Proxy Port", then press [OK].
7. "Proxy Port" setting screen will appear. Use [
Input Fields. When all Fields are entered, press [OK] to confirm the Entries.
Network
Language
Streaming Co...
Security
System
• The range of input numbers for the Port number is between 0 and 65535. (This number must be no
greater than 65535.)
8. In order to confi rm that this unit is connected to the Internet, perform "Connection Test"(refer to page 41).
D
Note
• For Proxy Port, certain Ports might be closed, blocked or unusable depending on your Network environment.
• When the settings are changed, the Network connection may be disabled depending on the device.
EN
Setup
a b c d e 1 2 3
f g h i j 4 5 6
k l m n o 7 8 9
p q r
s t . @ 0
u v w x y z ABC
Back Space Enter Clear
Setup
Change Proxy Port
Please Enter the New Port:
0 0 0 0 1
] to enter a Number and [
43
] to move between
continued on next page