Before You Start; Finding A Viewing Hdmi Input On Your Tv; Initial Setup - Sanyo FWBP706F Owner's Manual

5. BEFORE YOU START

5.1. Finding a Viewing HDMI Input on Your TV

After you have completed all of the connections to your TV, review the steps below.
1. Press [y(POWER/Standby)] to Turn On the unit.
2. Turn On your TV.
3. Switch your TV's input to the HDMI port which your unit is connected to.
This is the correct HDMI Input view.
• It may take a few moments for the Menu screen to appear.
• When this unit is turned On for the first time, the "Initial Setup" screen will appear.

5.2. Initial Setup

Please follow the instructions below to complete the initial Setup.
1. While Welcome screen is displayed, press [OK].
2. Language Setup screen will appear. Use [
Page: 2/4
Language Setting
Choose OSD language for all OSD windows,
menu, etc...
Previous
3. HDMI CEC Setup screen will appear. Use [
4. Network Setup screen will appear. Use [
• If you select "Set up now", refer to "Network Connection" on page 41 for further operation.
• If you select "Not now", the Home Menu screen will appear.
EN
] to select your Language, then press [OK].
Easy Setup
English
Français
Español
Next
] to select "On" or "Off", then press [OK].
] to select "Set up now" or "Not now", then press [OK].
17
continued on next page