Restore Default Settings - Sanyo FWBP706F Owner's Manual

11.6. Restore Default Settings

HOME A "Setup" A "
This unit will be Reset to Factory Default Settings. All the settings will be Initialized.
1. Use [
2. Use [ ] to select "
3. Use [ ] to select "System", then press [OK].
4. Use [ ] to select "Load Default", then press [OK].
5. Confi rmation message will appear. Use [
• Initialization will start.
D
Note
• The Initial Setup screen will appear upon completion of Initialization.
EN
" A "System" A "Load Default"
] to select "Setup" in the Home Menu, then press [OK].
", then press [OK].
] to select "OK".
55