CHECKING THE SHIFT DRUM ASSEMBLY
EAS2GC1325
1. Check:
• Shift drum groove
Damage/scratches/wear Replace the
shift drum assembly.
• Shift drum segment "1"
Damage/wear Replace the shift drum as-
sembly.
EAS2GC1326
CHECKING THE TRANSMISSION
1. Measure:
• Main axle runout
(with a centering device and dial gauge "1")
Out of specification Replace the main ax-
le.
Main axle runout limit
0.08 mm (0.0032 in)
2. Measure:
• Drive axle runout
(with a centering device and dial gauge "1")
Out of specification Replace the drive ax-
le.
Drive axle runout limit
0.08 mm (0.0032 in)
3. Check:
• Transmission gears
Blue discoloration/pitting/wear Replace
the defective gear (s).
• Transmission gear dogs
Cracks/damage/rounded edges Replace
the defective gear (s).
4. Check:
• Transmission gear movement
Rough movement Replace the defective
gear (s).
INSTALLING THE TRANSMISSION
EAS2GC1327
1. Install:
• 5th pinion gear (25T) "1"
• 3rd pinion gear (16T) "2"
• Collar "3"
• 4th pinion gear (20T) "4"
• 2nd pinion gear (15T) "5"
(to the main axle "6")
TIP
Before installation, apply molybdenum disulfide
oil to the inner and end surface of the idler gear
and to the inner surface of the sliding gear, then
install.
1
6
6-79
TRANSMISSION
5
4
3
2
M