Table of Contents
Advertisement
ì
In the Show "From" as field, enter the e-mail address you wish to display as the
sender when you receive the mail. This should be a genuine e-mail address, other-
wise spam filters may block your mail.
ì
Enter a suitable Subject for the e-mails.
ì
Enter the address of the SMTP server in the Outgoing Mail SMTP Server field.
If the SMTP server requires a "login" in order to send mail, tick the box My Mail
Server Requires Authentication and enter your user name and password.
ì
Select the desired time interval for sending mails in the Delay between E-Mails
field. This feature is used to prevent your e-mail inbox being flooded with e-mails.
ì
Motion Detection: Sensitivity determines how readily the motion detection sensor
is activated. You can select the sensitivity and also select the areas of the image to
be examined.
Note: You must select at least one area. If you don't, the motion detection will never
be triggered and no e-mail alerts will ever be sent.
ì
In the E-Mail Video section, select the desired options
– Set Include Video to Yes if you want to include a video with the e-mail.
– Set Video Length as desired. Note that if using higher resolution and lower com-
pression, even a short video file could be quite large.
ì
Click on Apply to save your settings.
Advanced Viewing Setup
31
Advertisement
Table of Contents
