JVC GZ-MG680 Instructions Manual page 46

o
Highlight thumbnail
using Touch Sensor
and touch OK button.
m
To select an on-screen
button appearing on
the left side, touch the
portion of the sensor
next to the on-screen
button.
PLAY/REC o
• How to change the MENU settings
o
Touch the MENU
button.
o
Slide your finger up
and down on the
Touch Sensor.
e
Touch the OK button.
• The sensors do not function if you touch them with
your finger nail or with gloves on.
• How to play back your videos
o
Press the PLAY/REC
button to display
thumbnails on the screen.
• Using on-screen buttons
m
To select an on-screen button appearing at the
bottom of the screen, touch the buttons underneath
them.
Still image (0) mode
Press the INFO button.
Battery Pack -_.:....
AC Adapter
To AC Outlet ~
(b=====:;::::::::;-
(110V to 240V)
Access lamp
• The battery (BN-VFBOBU) will take 110 minutes to
completely charge.
• The power/charge lamp blinks to indicate charging has
started. When the lamp goes out, charging is finished.
• Checking the remaining battery power
Video
(.aI)
mode
Press the INFa button twice
or the INFa button and then
select
[-I.
o
Close the LCD monitor to turn off the camcorder.
o
Attach the battery pack, then connect the AC adapter.