Single Domain Cabling Diagrams With D6000/D6020 Disk Enclosures; Single Domain Cabling Diagrams With D2000/D3000 Disk Enclosures - HP StoreEasy 1000 Administrator's Manual

enclosure is connected together and I/O module B of each disk enclosure is connected
together.
Only supported, documented cabling configurations are shown. Only cabling configurations
shown in this document or in related D2000/D3000 or D6000 documentation are supported
configurations.
CAUTION:
controllers in the StoreEasy system to the same disk enclosure; this is an unsupported
configuration and might result in data loss. If the StoreEasy system is configured incorrectly, and
you attempt to use Pool Manager, Pool Manager will detect the configuration and display an error
message. The controllers can be connected to different disk enclosures.

Single domain cabling diagrams with D6000/D6020 Disk Enclosures

The following diagram shows StoreEasy systems in single domain configurations with D6000
disk enclosures.
Figure 26 StoreEasy 1x50 with the P441 Controller
1. P441 controller
2. D6000 enclosure
3. Connection to SAS port 1 on the primary I/O module (left drawer) of D6000 enclosure
4. Connection to SAS port 1 on the primary I/O module (right drawer) of D6000 enclosure

Single domain cabling diagrams with D2000/D3000 Disk Enclosures

The following diagrams show different StoreEasy systems in single domain configurations with
the D2000/D3000 disk enclosures. With these cabling diagrams, SAS daisy chains are used to
connect the disk enclosures together.
while using multiple ports on the P441 controller to decrease latency to enclosures.
40 Installing HPE StoreEasy 1000 Storage
When cabling a dual domain configuration, ensure that you do not connect multiple
Figure 27 (page 41) shows cabling configuration option