Oven Bake Element Removal; Oven Broil Element Removal; Thermistor Removal - Sharp KB-3425LS Service Manual

KB-3425LS/K/W
KB-4425LS/K/W

OVEN BAKE ELEMENT REMOVAL

. Disconnect the power supply cord.
2. Refer to the disassembly instructions as previously stated.
3. Disconnect the wires by removing (2) nuts from element (Fig. O-5)
4. Remove the (2) screws holding the element from inside the oven (Fig. O-6).
5. Pull the Element into the oven.
6. Proceed in reverse to reinstall the Bake Element.
Fig. O-5

OVEN BROIL ELEMENT REMOVAL

. Disconnect the power supply cord.
2. Refer to the disassembly instructions as previously stated.
3. Disconnect the wires by removing (2) nuts from element (Fig. O-7)
4. Remove the (2) screws holding the element from inside the oven (Fig. O-8).
5. Pull the Element into the oven.
6. Proceed in reverse to reinstall the Broil Element.
Fig. O-7

THERMISTOR REMOVAL

. Disconnect the power supply cord.
2. Refer to the disassembly instructions as previously stated.
3. Unhook rear Molex wiring from Thermistor (Fig. O-9)
4. Remove tape from Thermistor rear hole.
5. Remove the (2) screws holding the Thermistor from inside the oven (Fig. O-10).
6. Pull the Thermistor into the oven.
7. Proceed in reverse to reinstall the Thermistor.
Fig. O-9
Fig. O-6
Fig. O-8
Fig. O-10
48