Engine; Running In Period; Running In Period - At First 50 Hours - Toro 02750 Operator's Manual

1.49

Engine

Refer to the ENGINE OPERATOR'S MANUAL
for maintenance information.

Running In Period

Check wheel nut torque settings:
During first 50 hours of use and in addition to
routine checks. Refer to DAILY AND BEFORE
USE. Check wheel nut torques twice a day.
Front axle wheel nut torque setting - 200 Nm (148
lbf.ft).
Rear axle wheel nut torque setting - 54 Nm (40 lbf.
ft).

Running In Period - At First 50 Hours

Change the transmission oil filter: Unscrew and
remove the bottom of the transmission oil filter
housing. Withdraw the filter element and discard.
Refit a new filter element (Part no. 924708) and
replace the housing.
Change the hydraulic oil return filter:
Unscrew and remove the return filter canister
and discard. Refit a new filter canister (Part no.
924692).
MAINTENANCE
ENGINE
1
2
1. Transmission oil filter
2. Centre cutterhead
3. Hydraulic oil tank
2
1. Hydraulic oil return filter
2. Engine fuel filter
1
1.49
3